Nissan Sentra B18 (2020-2025) Service Manual: Diagnosis System (side Radar Lh)
Consult Function (side Radar Left)
CONSULT Function (SIDE RADAR LEFT)
DESCRIPTION
CONSULT performs the following functions by communicating with the side radar LH.
|
Diagnosis mode |
CGW Status |
Description |
||
|---|---|---|---|---|
|
Restricted Mode |
Diag Test Mode |
Open Mode |
||
|
Self Diagnostic Result |
Display |
Display |
Display |
Displays malfunctioning system memorized in side radar |
|
CGW Information*1 |
Display*1 |
Display*1 |
Display*1 |
|
|
Data Monitor |
Display |
Display |
Display |
Displays real-time input/output data of side radar |
|
Active Test*1 |
Non-display*1 |
Display*1 |
Display*1 |
Enables an operational check of a load by transmitting a driving signal from the side radar to the load |
|
ECU Identification |
Display |
Display |
Display |
Displays side radar part number |
|
Network-DTC*2 |
Display |
Display |
Display |
Display network DTC which side radar memorizes when performing "Diagnosis (All System)". |
|
CAN Diag Support Monitor*2 |
Display |
Display |
Display |
The results of transmit/receive diagnosis of CAN communication can be read |
*1: In some Nissan Sentra vehicles, it is not malfunctioning in case of no display of "CGW Information". In this case, it is not necessary to switch the CGW status. In Nissan Sentra vehicles where "CGW information" is not displayed, "Work Support" and "Active Test" are always displayed.
*2: Displays when performing "Diagnosis (All System)".
CGW Information
Display the diagnosis mode which a user can perform in Diag Test mode/Open Mode by switching the CGW status from Restricted mode to Diag Test Mode/Open Mode.
For the method of switching CAN Gateway status, Refer to CONSULT Function.
Note:
In some Nissan Sentra vehicles, it is not malfunctioning in case of no display of "CGW Information". In this case, it is not necessary to switch the CGW status.
SELF DIAGNOSTIC RESULT
Self Diagnostic Result
Displays memorized DTC in side radar LH. Refer to DTC Index.
FFD (Freeze Frame Data)
The side radar records the following data when the malfunction is detected.
|
Freeze Frame Data item |
Description |
|---|---|
|
VHCL SP from ADAS |
The Nissan Sentra vehicle speed (from ADAS control unit 2) at the moment a malfunction is detected is displayed. |
|
TURN SIG STATUS |
Turn signal status at the moment a malfunction is detected is displayed. |
DATA MONITOR
|
Monitored item [Unit] |
Description |
|---|---|
|
BSW/CTA WARN STATUS [On/Off] |
Indicates [ON/OFF] status of Nissan Sentra vehicle detection |
|
CTA SYSTEM ON [On/Off] |
Indicates [ON/OFF] status of Rear Cross Traffic Alert system |
|
BSW STATUS [On/Off] |
Indicates [ON/OFF] status of Blind Spot Warning system |
|
VHCL SPD SE [km/h] |
Indicates Nissan Sentra vehicle speed [km/h] |
|
TURN SIGNAL [LH/RH/Off] |
Indicates the [LH/RH/OFF] operation of the signal |
|
SHIFT POSITION [P/R/N/D/L] |
Indicates position of transmission range switch |
|
LUMINANCE (LEFT) [Hi/Lo] |
Indicates the left side luminance level of the radar |
|
LUMINANCE (RIGHT) [Hi/Lo] |
Indicates the right side luminance level of the radar |
ACTIVE TEST
CAUTION:
-
Never perform the active test while driving.
-
Active test cannot be started while the BSW indicator is illuminated.
|
Active test item |
Operation |
Description |
|---|---|---|
|
BSW/BSI INDICATOR DRIVE |
On |
Outputs the voltage to illuminate the BSW/RCTA indicator |
|
Off |
Stops the voltage to illuminate the BSW/RCTA indicator |
ECU IDENTIFICATION
Displays side radar RH parts number.
Other materials:
Stop Lamp
Component Inspection
Component Inspection
CHECK STOP LAMP 1
Ignition switch OFF.
Disconnect rear combination lamp (body side) connector
and high-mounted stop lamp connector. ...
Ambient Sensor Signal Circuit
Diagnosis Procedure
Diagnosis Procedure
CHECK AMBIENT SENSOR POWER
SUPPLY
Ignition switch OFF.
Disconnect ambient sensor harness
connector.
...
P0192 Frp Sensor
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...