Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Diagnosis Procedure

Diagnosis Procedure

  1. CHECK MOONROOF SWITCH ASSEMBLY INPUT SIGNAL

      1. Ignition switch OFF.

      2. Disconnect moonroof switch assembly connector.

      3. Ignition switch ON.

      4. Check voltage between moonroof switch assembly harness connector and ground.

        (+)

        (–)

        Voltage

        (Approx.)

        Moonroof switch assembly

        Connector

        Terminal

        R27

        9

        Ground

        Battery voltage

        2

        8

    Is the inspection result normal?

    YES >>

    GO TO 3.

    NO >>

    GO TO 2.

  2. CHECK MOONROOF SWITCH ASSEMBLY CIRCUIT

      1. Ignition switch OFF.

      2. Disconnect moonroof motor assembly connector.

      3. Check continuity between moonroof motor assembly harness connector and moonroof switch assembly harness connector.

        Moonroof motor assembly

        Moonroof switch assembly

        Continuity

        Connector

        Terminal

        Connector

        Terminal

        R26

        7

        R27

        9

        Yes

        8

        8

        2

        2

      4. Check continuity between moonroof switch assembly harness connector and ground.

        Moonroof switch assembly

        —

        Continuity

        Connector

        Terminal

        R27

        9

        Ground

        No

        8

        2

    Is the inspection result normal?

    YES >>

    Replace moonroof motor assembly. Refer to Removal and Installation.

    NO >>

    Repair or replace harness.

  3. CHECK MOONROOF SWITCH ASSEMBLY GROUND CIRCUIT

      1. Ignition switch OFF.

      2. Check continuity between moonroof switch assembly harness connector and ground.

        Moonroof switch assembly

        —

        Continuity

        Connector

        Terminal

        R27

        10

        Ground

        Yes

    Is the inspection result normal?

    YES >>

    GO TO 4.

    NO >>

    Repair or replace the harness.

  4. CHECK MOONROOF SWITCH ASSEMBLY

    1. Check moonroof switch assembly.

      Refer to Component Inspection.

    Is the inspection result normal?

    YES >>

    Check intermittent incident. Refer to Intermittent Incident.

    NO >>

    Replace moonroof switch assembly. Refer to Removal and Installation.

Component Inspection
Component Inspection MOONROOF SWITCH ASSEMBLY CHECK MOONROOF SWITCH ASSEMBLY Ignition switch OFF. ...

Other materials:

Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injur ...

Exterior and interior lights
* Always check with the Parts Department at a NISSAN dealer for the latest parts information. Map light Interior light Door mirror turn signal light Headlight assembly Fog light (if so equipped) High-mount stop light Trunk light License plate light Rear combination ligh ...

Component Inspection
Component Inspection CHECK HEATED SEAT LH RELAY Ignition switch OFF. Disconnect heated seat LH relay connector. Check continuity between heated seat LH ...

© 2014-2026 Copyright www.nisentra.com