CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE
Check Intelligent Key system symptom table.
Refer to Diagnosis Procedure.
GO TO 2.
CHECK INTELLIGENT KEY
Check the inside of the Intelligent Key for rust or corrosion by water. Simultaneously check the internal circuits for damage. Squeeze, twist or bend the Intelligent Key and check the functionality again. Is the Intelligent Key operating normally?
Is the inspection result normal?
YES >>GO TO 3.
NO >>Replace Intelligent Key.
CHECK INTELLIGENT KEY BATTERY
Check the Intelligent Key battery.
Is the inspection result normal?
YES >>GO TO 4.
NO >>Replace Intelligent Key battery.
REGISTER INTELLIGENT KEY
Register the Intelligent Key again.
Check operation after replacement.
Is the inspection result normal?
YES >>Inspection End.
NO >>GO TO 5.
REPLACE INTELLIGENT KEY
Replace the Intelligent Key and perform registration again.
Check operation after replacement.
Is the inspection result normal?
YES >>Inspection End.
NO >>GO TO 6.
REPLACE INTELLIGENT KEY UNIT
Replace Intelligent Key unit. Refer to Removal and installation.
Confirm the operation after replacement.
Is the inspection result normal?
YES>>Inspection End.
NO>>Check intermittent incident. Refer to Intermittent Incident.
DescriptionDescription
Description
All doors do not lock/unlock using Intelligent
Key button. (One Intelligent Key has the symptom, other keys
operate normally.)
Note:
Before starting diagnosis check that Nissan Sentra vehicle
condition is as shown in “Conditions of vehicle”, and
check each symp ...
Difference between predicted and actual distances
The distance guide line and the vehicle width
guide line should be used as a reference only
when the vehicle is on a level, paved surface. The
distance viewed on the monitor is for reference
only and may be different than the actual distance
between the vehicle and displayed objects.
Backing u ...
DTC/circuit diagnosis
POWER SUPPLY AND GROUND CIRCUIT
A/C AUTO AMP.
A/C AUTO AMP. : Diagnosis Procedure
Regarding Wiring Diagram information, refer to HAC-145, "Wiring Diagram" or
HAC-152, "Wiring Diagram".
1.CHECK FUSE
Check fuses [No. 5, 8 and 21, located in the fuse block (J/B)].
NOTE:
Ref ...