CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE
Check Intelligent Key system symptom table.
Refer to Diagnosis Procedure.
GO TO 2.
CHECK OUTSIDE KEY ANTENNA AND INSIDE KEY ANTENNA
Use SIGNAL TECH II to check each outside key antenna and inside key antenna. For the inspection method and how to use SIGNAL TECH II, refer to “NISSAN/INFINITI SIGNAL TECH II USER GUIDE”.
Is the inspection result normal?
YES >>GO TO 3.
NO >>Repair or replace the malfunctioning parts.
REGISTER INTELLIGENT KEY
Register the Intelligent Key again.
Check operation after replacement.
Is the inspection result normal?
YES >>Inspection End.
NO >>GO TO 4.
REPLACE INTELLIGENT KEY
Replace the Intelligent Key and perform registration again.
Check operation after replacement.
Is the inspection result normal?
YES >>Inspection End.
NO >>GO TO 5.
REPLACE INTELLIGENT KEY UNIT
Replace Intelligent Key unit. Refer to Removal and installation.
Check operation after replacement.
Is the inspection result normal?
YES>>Inspection End.
NO>>Check intermittent incident. Refer to Intermittent Incident.
DescriptionConfirmation Procedure
Confirmation Procedure
PERFORM DTC CONFIRMATION
PROCEDURE
CONSULT
Select “Self Diagnosis Result” mode
of “HANDS FREE MODULE".
Is DTC detected?
YES>>
Refer to DTC Diagnosis Procedure.
...
Select Learning
Work Procedure
Work Procedure
Note:
Always perform Clutch Point Learning before Select
Learning.
Perform Select Learning with CVT fluid temperature
below 50°C (122°F) and again with fluid temperature
above 50°C (122°F).
...
Anti-lock Braking System (ABS)
WARNING
The Anti-lock Braking System (ABS) is a
sophisticated device, but it cannot prevent
accidents resulting from careless
or dangerous driving techniques. It can
help maintain vehicle control during
braking on slippery surfaces. Remember
that stopping distances ...