Vehicle conditions:
Seat belt indicator lamp is ON, passenger air bag indicator lamp is ON or OFF.
Passenger seat is unoccupied.
Driver seat belt is buckled.
Passenger seat belt buckle harness and front seat belt buckle switch RH are OK (buckle passenger seat belt to check if seat belt indicator lamp turns OFF, driver seat belt needs to be buckled).
REPLACE OCS SENSORS
Replace the OCS sensors. Refer to Removal and Installation.
Perform zero point reset. Refer to Special Repair Requirement.
Is symptom still present?
YES >>GO TO 2.
NO >>Inspection End.
REPLACE PASSENGER SEAT CUSHION FRAME
Replace the passenger seat cushion frame. Refer to Disassembly and Assembly.
Perform zero point reset. Refer to Special Repair Requirement.
Inspection End.
Removal and Installation
Removal and Installation
CAUTION:
Do not cause impact to the steering column during
lower joint removal and installation.
Do not move the steering gear during removal and
installation of the lower joint.
REMOVAL
...
U1300 Av Communication Circuit
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection condition
...
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
...