Nissan Sentra B18 (2020-2025) Service Manual: Cushion Heater Rh
Component Function Check
Component Function Check
-
CHECK FUNCTION
-
Check that cushion heater RH warms to the preset temperature when operating the heated seat switch RH to HIGH and LOW.
Is the inspection result normal?
YES>>Cushion heater RH function is OK.
NO>>Refer to Diagnosis Procedure.
-
Diagnosis Procedure
Diagnosis Procedure
-
CHECK FRONT SEAT HEATER RH POWER SUPPLY
-
-
Ignition switch ON.
-
Check voltage between front seat heater RH harness connector and ground.
(+)
(–)
Condition
Voltage
(Approx.)
Front seat heater RH
Connector
Terminal
B13
3
Ground
Heated seat switch RH (HIGH)
ON
Battery voltage
Other than above
0 V
4
Heated seat switch RH (LOW)
ON
Battery voltage
Other than above
0 V
-
Is the inspection result normal?
YES>>GO TO 3.
NO>>GO TO 2.
-
-
CHECK FRONT SEAT HEATER RH CIRCUIT
-
-
Turn heated seat switch OFF.
-
Ignition switch OFF.
-
Disconnect front seat heater RH connector, heated seat RH low relay connector and heated seat RH high relay connector.
-
Check continuity between front seat heater RH harness connector, heated seat RH low relay harness connector and heated seat RH high relay harness connector.
Front seat heater RH
Heated seat RH relay
Continuity
Connector
Terminal
Connector
Terminal
B13
3
High
M144
3
Yes
4
Low
M147
-
Check continuity between front seat heater RH harness connector and ground.
Front seat heater RH
(–)
Continuity
Connector
Terminal
B13
3
Ground
No
4
-
Is the inspection result normal?
YES>>Replace corresponding heated seat RH relay.
NO>>Repair or replace harness.
-
-
CHECK FRONT SEAT HEATER RH GROUND CIRCUIT
-
-
Ignition switch OFF.
-
Disconnect front seat heater RH connector.
-
Check continuity between front seat heater RH harness connector and ground.
Front seat heater RH
(–)
Continuity
Connector
Terminal
B13
6
Ground
Yes
-
Is the inspection result normal?
YES>>Replace front seat heater RH. Refer to Exploded View.
NO>>Repair or replace harness.
-
Other materials:
Manifold Absolute Pressure Sensor
Component Inspection
Component Inspection
CHECK MANIFOLD ABSOLUTE PRESSURE
(MAP) SENSOR-1
Turn ignition switch OFF.
Start engine and warm it up to normal
operating temperature.
Turn ...
Rear Bumper
Exploded View
Exploded View
EXCEPT FOR SR
1.
Rear bumper side bracket (LH)
2.
Rear bumper reinforcement support
(L ...
B0012-55 Active Vent
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Trouble diagnosis
content)
DTC Detection Condition
...