Nissan Sentra B18 (2020-2025) Service Manual: Confirmation Procedure
-
PERFORM COMPONENT FUNCTION CHECK
-
CONSULT-
Ignition ON, and wait for 5 seconds or more.
-
Select “Self Diagnostic Result” mode of “IPDM E/R”.
-
Is the inspection result normal?
YES>>To check malfunction symptom before repair: Refer to Intermittent Incident.
YES>>Confirmation after repair: Inspection End.
NO>>Refer to DTC Diagnosis Procedure.
-
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Trouble diagnosis cont ...
Dtc Diagnosis Procedure
DTC Diagnosis
Procedure
CHECK BATTERY CURRENT SENSOR POWER
Ignition switch OFF.
Disconne ...
Other materials:
Precaution for Work
When removing or disassembling each component, be careful not to damage
or deform it. If a component
may be subject to interference, be sure to protect it with a shop cloth.
When removing (disengaging) components with a screwdriver or similar
tool, be sure to wrap the component
with a ...
Dtc Description
DTC Description
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure reported by the TPMS ...
Service Notice and Precautions for TPMS
WARNING:
Radio waves could adversely affect electric medical equipment. Those
who use a pacemaker should
contact the electric medical equipment manufacturer for the possible influences
before use.
Low tire pressure warning lamp blinks for 1 minute, then turns ON when
occurring any malfu ...
