Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Nissan Sentra B18 (2020-2025) Service Manual: Bcm

Consult Function (bcm - Bcm)

CONSULT Function (BCM - BCM)

DATA MONITOR

Note:

The following table includes information (items) inapplicable to this Nissan Sentra vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Monitor item [UNIT]

Description

Door switch AS

[On/Off]

Indicated [On/Off] condition of front door switch RH

ECO mode switch

[On/Off]

Indicated [On/Off] condition of ECO mode switch

Battery voltage (door lock 1)

[On/Off]

Indicated [On/Off] condition of battery power supply (door lock 1) status

Battery voltage (door lock 2)

[On/Off]

Indicated [On/Off] condition of battery power supply (door lock 2) status

Battery voltage (ECU)

[On/Off]

Indicated [On/Off] condition of battery power supply status

Battery voltage (flasher)

[On/Off]

Indicated [On/Off] condition of battery power supply (turn signal lamp) status

Battery voltage (stop lamp)

[On/Off]

Indicated [On/Off] condition of battery power supply (stop lamp) status

Battery voltage (wiper)

[On/Off]

Note:

This item is displayed, but cannot be monitored

Seat belt switch (driver)

[On/Off]

Indicated [On/Off] condition of front seat belt buckle switch LH

Sport mode switch

[On/Off]

Indicated [On/Off] condition of drive sport mode switch

Rear wiper auto stop switch

[On/Off]

Note:

This item is displayed, but cannot be monitored

WORK SUPPORT

Item

Description

VIN REGISTRATION

Register of the Nissan Sentra vehicle identification number when replacing BCM.

3-time flasher setting

This function is change 3-time flasher setting.

CGW INFORMATION

Display the diagnosis mode which a user can perform in Diag Test mode/Open Mode by switching the CGW status from Restricted mode to Diag Test Mode/Open Mode.

For the method of switching CAN Gateway status, Refer to CONSULT Function.

CONFIGURATION

Refer to Description.

    Comb Sw
    Consult Function (bcm - Comb Sw) CONSULT Function (BCM - COMB SW) DATA MONITOR Note: The following table includes information (items) inapplicable to this Nissan Sentra vehicle....
    Immu
    Consult Function (bcm - Immu) CONSULT Function (BCM - IMMU) DATA MONITOR Note: The following table includes information (items) inapplicable to this Nissan Sentra vehicle. For i...

    Other materials:

    C1741-21 Tire Pressure Sensor No Data Fl
    Dtc Description DTC Description Note: The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS sensor IDs Display tire pressure rep ...

    Heater and air conditioner (automatic)
    AUTO (automatic) climate control button / temperature control dial (driver's side) Display screen Heated seat switches (if so equipped) SYNC button / temperature control dial (passenger's side) A/C (air conditioner) button Air recirculation button A ...

    The System Does Not Detect the Vehicle Ahead at All
    Diagnosis Procedure Diagnosis Procedure When AEB system is active, the AEB system does not perform any control even though there is a vehicle ahead. CHECK INFORMATION DISPLAY Start the “Self Diagnosis” of combination meter. Refer to De ...