Nissan Sentra B18 (2020-2025) Service Manual: Additional Service When Replacing Control Unit
Description
Warning:
Always perform zero point reset using CONSULT when removing and installing the front passenger seat or servicing the occupant classification system. If zero point reset is not performed, the OCS may not operate normally, which may increase the risk of serious injury in a collision.
Special Repair Requirement
WORK PROCEDURE WHEN REPLACING OCS CONTROL UNIT
-
PERFORM ZERO POINT RESET
-
Perform zero point reset. Refer to Special Repair Requirement.
Inspection End.
-
Zero Point Reset
Description
Description
Zero point reset is an initializing procedure for
the OCS (weight) sensors that must be performed using CONSULT when
removing and installing passenger seat or serv ...
Other materials:
Oil filter
Removal and Installation
REMOVAL
Remove engine under cover. Refer to EXT-16, "Exploded View".
Drain engine oil. Refer to LU-8, "Draining".
Remove the oil filter using Tool (A) as shown.
: Front
Tool number : KV10115801 (J-38956)
WARNING:
Be careful not to burn you ...
Description
Description
All doors do not lock/unlock using Intelligent
Key button. (One Intelligent Key has the symptom, other keys
operate normally.)
Note:
Before starting diagnosis check that Nissan Sentra vehicle
condition is as shown in “Conditions of vehicle”, and
check each symp ...
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection condition
...
