Nissan Sentra Service Manual: Wiring diagram

Ecu diagnosis information

Bcm, ipdm e/r List of ecu reference ...

Basic inspection

Diagnosis and repair work flow Work Flow Overall sequence Detailed flow 1. Get information for symptom Get the detailed information from the customer about the symptom (the condition and th ...

Other materials:

Additional service when replacing ecm
Description When replacing ECM, the following procedure must be performed. (For details, refer to EC-135, "Work Procedure".) PROGRAMMING OPERATION NOTE: After replacing with a blank ECM, programming is required to write ECM information. Be sure to follow the procedure to perform t ...

Brake master cylinder
Exploded View Reservoir cap Oil strainer Reservoir tank Cylinder body Pin O-ring Grommet Apply brake fluid PBC (Poly Butyl Cuprysil) grease or silicone-based grease Removal and Installation REMOVAL CAUTION: Do not spill or splash brake fluid on painted surfaces. ...

Keyfob (if so equipped)
Replace the battery in the keyfob as follows: Remove the screw A . Insert a small screwdriver into the slit of the corner B and twist it to separate the upper part from the lower part. Use a cloth to protect the casing. Replace the battery with a new one. Do not touch the int ...