Nissan Sentra manuals

Nissan Sentra Service Manual: Symptom diagnosis

Interior lighting system symptoms

Symptom Table

Caution:

Perform the self-diagnosis with consult before the symptom diagnosis. Perform the trouble diagnosis if any dtc is detected.

Removal and installation


Push-button ignition switch illumination circuit
Description Provides the power supply and the ground to control the push-button ignition switch illumination. Component function check 1.Check push-button ignition switch illumination operation ...

Removal and installation
...

Other materials:

P1574 ASCD Vehicle speed sensor
Description The ECM receives two vehicle speed sensor signals via CAN communication line. One is sent from combination meter, and the other is from TCM (Transmission control module). The ECM uses these signals for ASCD control. Refer to EC-51, "AUTOMATIC SPEED CONTROL DEVICE (ASCD) : Sys ...

Engine coolant temperature gauge
NOTE: The ignition switch must be placed in the ON position for the gauge to give a reading. The gauge indicates the engine coolant temperature. The engine coolant temperature is within the normal range when the reading is within the zone A shown in the illustration. The engine coolan ...

Instrument lower panel lH
Removal and Installation REMOVAL Remove the instrument side finisher LH (1) using a suitable tool. Remove the hood and fuel filler handle assembly from the instrument lower panel LH. Refer to DLK-191, "FUEL FILLER OPENER CABLE : Removal and Installation". Release the ...

В© 2014-2024 Copyright www.nisentra.com