Nissan Sentra manuals

Nissan Sentra Service Manual: Service data and specifications (SDS)

Nissan Sentra Service Manual / Brakes / Parking brake system / Service data and specifications (SDS)

Parking Drum Brake

Parking Brake Control


Parking Brake Control

Brake control system


Parking brake shoe
Removal and Installation - Drum Brake If equipped with drum brakes, refer to BR-42, "Removal and Installation". Exploded View - Disc Brake Anti-rattle pin Back plate ...

Brake control system
...

Other materials:

Brake master cylinder
Inspection Check for brake fluid leakage at the following areas: Master cylinder mounting face Reservoir tank mounting face Brake tube and brake tube connections Brake hose and brake hose connections If any brake fluid leakage is found, repair as necessary. On Board Inspection LEAK ...

Glove box lamp
Removal and installation Warning: Do not touch bulb while it is lit or right after being turned off. Burning may result. Caution: Do not touch glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to bulb. Removal Remove the glove box assembly ...

P050A, P050B, P050E Cold start control
Description ECM controls ignition timing and engine idle speed when engine is started with pre-warming up condition. This control promotes the activation of three way catalyst by heating the catalyst and reduces emissions. DTC Logic DTC DETECTION LOGIC NOTE: If DTC P050A, P050B or P050E ...

В© 2014-2021 Copyright www.nisentra.com