Nissan Sentra Service Manual: Wiring diagram

Power generation voltage variable control system

System Diagram System Description Power generation variable voltage control system has been adopted. By varying the voltage to the generator, engine load due to power generation of the gener ...

Basic inspection

Diagnosis and repair workflow Work flow (with exp-800 ni or gr8-1200 ni) CHARGING SYSTEM DIAGNOSIS WITH EXP-800 NI OR GR8-1200 NI To test the charging system, use the following special service tool ...

Other materials:

Clutch pedal
Inspection and Adjustment INSPECTION The Height of Clutch Pedal Pull back the floor trim and remove front floor spacer (LH) for access to floor panel. Check that the clutch pedal height (H1) from the floor panel (1) is within the reference value. Clutch pedal height (H1) Replace ...

RCTA (Rear Cross Traffic Alert)
The RCTA function uses the BSM rear side radar sensors installed behind the rear bumper. This function is intended to assist the driver in checking areas that are not easily visible when backing up. System components Multi-information display Turning the RCTA function on/off. Outside r ...

Tcm branch line circuit
Diagnosis procedure 1.Check connector Turn the ignition switch off. Disconnect the battery cable from the negative terminal. Check the following terminals and connectors for damage, bend and loose connection (unit side and connector side). Tcm Harness connector f50 Harness co ...