Nissan Sentra Service Manual: Wiring diagram

Ecu diagnosis information

Ipdm e/r (intelligent power distribution module engine room) Reference Value Values on the diagnosis tool Terminal layout Physical values Fail-Safe Can communic ...

Dtc/circuit diagnosis

U1000 can comm circuit Description Refer to LAN-7, "CAN COMMUNICATION SYSTEM : System Description". Dtc logic Dtc detection logic Consult display Dtc detection condition P ...

Other materials:

Outside mirrors
The outside mirror remote control will operate only when the ignition switch is in the ACC or ON position. Move the small switch 1 to select the right or left mirror. Adjust each mirror to the desired position using the large switch 2 . WARNING Objects viewed in the outside mi ...

Multiport fuel injection system
MULTIPORT FUEL INJECTION SYSTEM : System Description SYSTEM DIAGRAM *1: ECM determines the start signal status by the signals of engine speed and battery voltage. *2: M/T models *3: CVT models *4: This sensor is not used to control the engine system under normal conditions. SYSTEM DES ...

P0500 VSS
EXCEPT FOR M/T MODELS EXCEPT FOR M/T MODELS : Description ECM receives vehicle speed signals from two different paths via CAN communication line: One is from the ABS actuator and electric unit (control unit) via the combination unit and the other is from TCM. EXCEPT FOR M/T MODELS : DTC Logi ...