Nissan Sentra manuals

Nissan Sentra Service Manual: Wiring diagram

Can system

Wiring Diagram






Basic inspection


System description
Component parts Component parts location ABS actuator and electric unit (control unit) Av control unit A/c auto amp. Ecm Ipdm e/r Tcm Data link connector EPS control unit Bc ...

Basic inspection
Diagnosis and repair workflow Interview sheet Note: Refer to LAN-16, "Trouble Diagnosis Procedure" for how to use interview sheet. ...

Other materials:

P0138 HO2S2
DTC Logic DTC DETECTION LOGIC The heated oxygen sensor 2 has a much longer switching time between rich and lean than the air fuel ratio (A/ F) sensor 1. The oxygen storage capacity of the three way catalyst (manifold) causes the longer switching time. MALFUNCTION A To judge the malfunction ...

The key warning does not sound (without intelligent key)
Description The key warning chime does not sound, when all of the following conditions are fulfilled. Key inserted into the key cylinder (key switch signal on). Ignition switch is in acc or off (ignition switch signal off). Driver side door is open (driver side door switch on) Diagnosi ...

Intake manifold tuning system
INTAKE MANIFOLD TUNING SYSTEM : System Description SYSTEM DIAGRAM SYSTEM DESCRIPTION This system switches the length of intake air path according to the low-to-medium speed range or high speed range. Torque is increased in the low-to-medium speed range and the engine output is improved ...

В© 2014-2026 Copyright www.nisentra.com