Nissan Sentra Service Manual: Wiring diagram

Ecu diagnosis information

Bcm Reference value NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. Activate and d ...

Basic inspection

Inspection and adjustment Additional service when replacing control unit (bcm) Additional service when replacing control unit (bcm) : description Before replacement When replacing BCM, save or pr ...

Other materials:

Dtc/circuit diagnosis
Eco mode switch Component function check 1. Check eco mode switch operation Turn ignition switch ON. Check ECO mode indicator lamp turns ON/OFF on combination meter when turn ECO mode switch ON/ OFF. Is the inspection result normal? Yes >> inspection end No >> go to dm ...

Washing
Wash dirt off with a wet sponge and plenty of water. Clean the vehicle thoroughly using a mild soap, a special vehicle soap or general purpose dishwashing liquid mixed with clean, lukewarm (never hot) water. CAUTION Do not use car washes that use acid in the detergent. Some car washes, es ...

Brake pedal
Adjustment BRAKE PEDAL HEIGHT Remove instrument lower panel LH. Refer to IP-21, "Removal and Installation". Disconnect the harness connectors from the brake pedal position switch (if equipped) and the stop lamp switch. Turn the stop lamp switch and brake pedal position swi ...