Nissan Sentra Service Manual: Wiring diagram

Ecu diagnosis information

BCM Reference value Note: The signal tech ii tool (j-50190) can be used to perform the following functions. Refer to the signal tech ii user guide for additional information. Activate and di ...

Basic inspection

Inspection and adjustment Additional service when replacing control unit (bcm) ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Description Before replacement When replacing bcm, save or pri ...

Other materials:

If a warning message is displayed
The multi-information display shows warnings of system malfunctions, incorrectly performed operations, and messages that indicate a need for maintenance. When a message is shown, perform the correction procedure appropriate to the message. 4.2-inch display 7-inch display Master warning ...

P0127 IATSensor
DTC Logic DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible cause P0127 IAT SENSOR-B1 (Intake air temperature too high) Rationally incorrect voltage from the sensor is sent to ECM, compared with the ...

Tire labeling
Federal law requires tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides the tire identification number (TIN) for safety standard certification. The TIN can b ...