Nissan Sentra manuals

Nissan Sentra Service Manual: Wiring diagram

Horn

Wiring diagram



Removal and installation


Precaution
Precaution for supplemental restraint system (srs) "air bag" and "seat belt pre-tensioner" The supplemental restraint system such as “air bag” and “seat belt pre- ...

Removal and installation
Horn Exploded view Horn high Horn low Front Note: Shown with the front fascia removed for clarity. Removal and installation Horn low Removal Remove the core support cover. Ref ...

Other materials:

Glass
Use glass cleaner to remove smoke and dust film from the glass surfaces. It is normal for glass to become coated with a film after the vehicle is parked in the hot sun. Glass cleaner and a soft cloth will easily remove this film. CAUTION When cleaning the inside of the windows, do not use sha ...

P1652 Starter motor system comm
Description ECM controls ON/OFF state of the starter relay, according to the engine and vehicle condition. ECM transmits a control signal to IPDM E/R via BCM by CAN communication. Under normal conditions, ECM controls and maintains the starter relay in OFF state during following condition: ...

B0010, B0011 Passenger airbag module
Description DTC B0010, B0011 PASSENGER AIR BAG MODULE The passenger air bag module is dual stage and is wired to the air bag diagnosis sensor unit. The air bag diagnosis sensor unit will monitor for opens and shorts in detected lines to the passenger air bag module. PART LOCATION Refer to S ...

© 2014-2022 Copyright www.nisentra.com