Exploded view
Clip
Washer nozzle
Washer nozzle : removal and installation
REMOVAL
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
Adjust the nozzle spray pattern. Refer to WW-55, "WASHER NOZZLE : Adjustment".
Washer nozzle : adjustment
NOTE:
Spray position for (LH) shown. (RH) is symmetrical.
Insert a suitable tool into the nozzle hole (A) and move up/down and left/right to adjust the spray position of each nozzle (1).
Washer tube
Washer tube : removal and installation
REMOVAL
INSTALLATION
Installation is in the reverse order of removal.
NOTE:
Fill washer tank with specified amount of fluid. Refer to WW-64, "Specifications".
P1212 TCS Communication line
Description
This CAN communication line is used to control the smooth engine operation
during the TCS operation. Pulse
signals are exchanged between ECM and “ABS actuator and electric unit (control
unit)”.
Be sure to erase the malfunction information such as DTC not only for Ð²Ð‚Ñ ...
Component parts
Component parts location
Bcm (view with instrument panel removed)
Ipdm e/r (rear window defogger relay)
A/c auto amp. (View with a/c switch
assembly removed)
A/C switch assembly (rear window defogger
switch) (with auto A/C)
A/c switch assembly (rear window
defogger switch) (wit ...
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injur ...