Nissan Sentra Owners Manual: Warning/indicator lights and audible reminders
Anti-lock Braking System (ABS)
warning light
Brake warning light
Charge warning light
Door open warning light
Engine oil pressure warning
light
Low fuel warning light
Low tire pressure warning light
Low windshield-washer fluid
warning light
NISSAN Intelligent Key® lock
warning light
(M/T models) (if so equipped)
NISSAN Intelligent Key® warning
light (if so
equipped)
Power steering warning light
P position selecting warning
light
(CVT models) (if so equipped)
Seat belt warning light
Supplemental air bag warning
light
Continuously Variable
Transmission (CVT)
position indicator light (CVT models)
Cruise main switch indicator
light
(if so equipped)
ECO mode indicator light
Engine start operation indicator
light
(if so equipped)
Front fog light indicator light
(if so equipped)
Front passenger air bag status
light
High beam indicator light (blue)
Malfunction Indicator Light
(MIL)
Overdrive off indicator light (CVT
models)
Security indicator light
Side light and headlight
indicator light (green)
Slip indicator light
SPORT mode indicator light
Turn signal/hazard indicator
lights
Vehicle Dynamic Control (VDC)
off indicator
light
Compass display (if so equipped)
This unit measures terrestrial magnetism and indicates
heading direction of vehicle.
With the ignition switch in the ON position, press
the button as described in the
chart below
to activate ...
Checking bulbs
With all doors closed, apply the parking brake
and place the ignition switch in the ON position
without starting the engine. The following lights
will come on:
If equipped, the following lights ...
Other materials:
Normal operating condition
Description
FUEL CUT CONTROL (AT NO LOAD AND HIGH ENGINE SPEED)
If the engine speed is above 2,500 rpm under no load (for example, the
selector lever position is neutral and
engine speed is over 2,500 rpm) fuel will be cut off after some time. The exact
time when the fuel is cut off varies
b ...
Trouble diagnosis - specification
value
Description
The specification (SP) value indicates the tolerance of the value that is
displayed in “SPEC” of “DATA MONITOR”
mode of CONSULT during normal operation of the Engine Control System. When the
value in “SPEC” of
“DATA MONITOR” mode is within t ...
Vehicle Dynamic Control (VDC) off switch
The vehicle should be driven with the Vehicle
Dynamic Control (VDC) system on for most driving
conditions.
If the vehicle is stuck in mud or snow, the VDC
system reduces the engine output to reduce
wheel spin. The engine speed will be reduced
even if the accelerator is depressed to the f ...
