Nissan Sentra manuals

Nissan Sentra Owners Manual: Voice Adaptation (VA) mode

Voice Adaptation allows up to two out-of-dialect users to train the system to improve recognition accuracy. By repeating a number of commands, the users can create a voice model of their own voice that is stored in the system. The system is capable of storing a different voice adaptation model for each connected phone.

Training procedure

The procedure for training a voice is as follows.

  1. Position the vehicle in a reasonably quiet outdoor location.
  2. Sit in the driver’s seat with the engine running, the parking brake on, and the transmission in P (Park).
  3. Press and hold the for morebutton
    for more than 5 seconds.
  4. The system announces: “Press the PHONE/SEND ( hands-free phone system to enter the voice ) button for the
    hands-free phone system to enter the voice adaptation mode or press the PHONE/END ( different language.” ) button to select a
    different language.”
  5. Press the button.


    For information on selecting a different language, see “Choosing a language” in this section.

  6. Voice memory A or memory B is selected automatically. If both memory locations are already in use, the system will prompt you to overwrite one. Follow the instructions provided by the system.
  7. When preparation is complete and you are ready to begin, press the button.
    button.
  8. The VA mode will be explained. Follow the instructions provided by the system.
  9. When training is finished, the system will tell you an adequate number of phrases have been recorded.
  10. The system will announce that voice adaptation has been completed and the system is ready.

The VA mode will stop if:

Training phrases

During the VA mode, the system instructs the trainer to say the following phrases. (The system will prompt you for each phrase.)

List of voice commands
Main Menu “Call” “Phonebook” “Recent Calls” “Connect Phone” When you press and release the  button on the steering wheel, you can choose from the commands on the Main Men ...

Manual control
While using the voice recognition system, it is possible to select menu options by using the steering wheel controls instead of speaking voice commands. This can be especially helpful if the noise ...

Other materials:

Glove box assembly
Removal and Installation REMOVAL Remove the instrument side finisher RH using a suitable tool. Remove the glove box assembly upper screws (A). Remove the glove box assembly lower screws (A). Disconnect the harness connectors from the trunk switch and glove box lamp, the ...

System
System Description Operation description A/C control transmits rear window defogger switch signal to A/C auto amp. when rear window defogger switch turns ON while ignition switch is ON. A/C auto amp. transmits rear window defogger switch signal to BCM Bcm transmits rear window defogg ...

Before starting the engine
Make sure the area around the vehicle is clear. Check fluid levels such as engine oil, coolant, brake and clutch fluid(if so equipped), and windshield-washer fluid as frequently as possible, or at least whenever you refuel. Check that all windows and lights are clean. Visually inspe ...

© 2014-2025 Copyright www.nisentra.com