Nissan Sentra Service Manual: Unit disassembly and assembly

Rear disc brake

BRAKE PAD BRAKE PAD : Exploded View Upper sliding pin bolt Lower sliding pin bolt Bushing Cylinder body Inner shim cover Inner shim Inner pad (with pad wear sensor) Pad retaine ...

Front disc brake

Exploded View Cap Bleeder valve Cylinder body Piston seal Piston Piston boot Upper sliding pin Lower sliding pin Sliding pin boot Bushing Torque member Apply brake flui ...

Other materials:

OIL
Description MAINTENANCE OF OIL LEVEL The compressor oil is circulating in the system together with the refrigerant. It is necessary to fill compressor with oil when replacing A/C system parts or when a large amount of refrigerant leakage is detected. It is important to always maintain oil l ...

Steering gear and linkage
Exploded View REMOVAL Steering gear assembly Front suspension member Front Removal and Installation REMOVAL Set steering wheel to the straight-ahead position. Remove floor cover (1). Lower shaft assembly (2). Remove the lower shaft assembly bo ...

Evaporative emission system
Inspection EVAP CANISTER 1.CHECK EVAP CANISTER Block port (B). Blow air into port (A) and check that it flows freely out of port (C). Release blocked port (B). Apply vacuum pressure to port (B) and check that vacuum pressure exists at the ports (A) and (C). Block port (A) and (B). ...