Nissan Sentra manuals

Nissan Sentra Service Manual: Unit disassembly and assembly

Optical sensor
Removal and installation REMOVAL Remove the defroster grille (LH) using a suitable tool. Disconnect the harness connector from the optical sensor. Release the pawls and remove the optical sen ...

Front combination lamp
Exploded View Large cover (not serviceable) Small cover (not serviceable) Front combination lamp Halogen lamp bulb (high beam) Turn signal lamp bulb Turn signal lamp bulb socket LE ...

Other materials:

Front fog lamp
Removal and Installation FOG LAMP Removal Position the fender protector aside. Refer to EXT-28, "FENDER PROTECTOR : Removal and Installation - Front Fender Protector". Disconnect the harness connector from the front fog lamp. Remove the screws and the front fog lamp. Inst ...

How to erase permanent  DTC
Description OUTLINE When a DTC is stored in ECM When a DTC is stored in ECM and MIL is ON, a permanent DTC is erased with MIL shutoff if the same malfunction is not detected after performing the driving pattern for MIL shutoff three times in a raw. *1: When the same malfunction is detec ...

Main power supply and ground circuit
Diagnosis Procedure 1.CHECK TCM POWER CIRCUIT (PART 1) Turn ignition switch OFF. Disconnect TCM connector. Check voltage between TCM harness connector terminals and ground. Is the inspection result normal? YES >> GO TO 2. NO >> GO TO 4. 2.CHECK TCM POWER CIRCUIT (PAR ...

В© 2014-2026 Copyright www.nisentra.com