Nissan Sentra Service Manual: Unit disassembly and assembly
Center console assembly
Exploded View
- Center console upper finisher
- Center console side finisher (RH)
- Center console side finisher (LH)
- Center console side finisher screw cover
(LH/RH)
- Center console assembly
- Center console screw cover (LH/RH)
- Center console rear finisher
- Center console rear finisher cover
- Center console coin tray (if
equipped)
- Heated seat switch finisher (if equipped)
- Center console cup holder finis
- Shift selector finisher
- Storage bin
Disassembly and Assembly
DISASSEMBLY
- Remove the center console assembly. Refer to IP-17, "Removal and
Installation".
- Remove the center console upper finisher.
- Remove the center console upper finisher screws (A).
- Release the center console upper finisher pawls using a suitable
tool.
: Pawl
- Remove the center console upper finisher (1).
- Remove the center console rear finisher
- Release the center console rear finisher cover pawls using a
suitable tool, then remove the center console rear finisher cover
(1).
: Pawl
- Release the center console rear finisher clips using a suitable tool,
then remove the center console rear
finisher (1).
: Metal clip
- Release the center console accessory finisher pawls using a suitable
tool and remove.
ASSEMBLY
Assembly is in the reverse order of disassembly.
Removal and Installation
REMOVAL
Remove the instrument side finisher RH using a suitable tool.
Remove the glove box assembly upper screws (A).
Remove the glove box assembly lower scre ...
Other materials:
Both side front fog lamps are not
turned on
Description
The front fog lamps do not turn on in any setting.
Diagnosis procedure
1.Combination switch (lighting and turn signal switch) inspection
Check the combination switch (lighting and turn signal switch). Refer to
bcs-72, "symptom table" (with intelligent
key system) or bcs- ...
Hazard switch
Component function check
1.Check hazard switch signal by consult
Consult data monitor
Turn ignition switch ON.
Select hazard sw of bcm (flasher) data monitor item.
While operating the hazard switch, check the monitor status.
Is the inspection result normal?
Yes >> hazard swi ...
General maintenance
During the normal day-to-day operation of the
vehicle, general maintenance should be performed
regularly as prescribed in this section. If
you detect any unusual sounds, vibrations or
smells, be sure to check for the cause or have a
NISSAN dealer do it promptly. In addition, you
should notify ...
В© 2014-2024 Copyright www.nisentra.com