Description
Diagnosis procedure
1.Check bcm input signal
Check the bcm input signal. Refer to dlk-102, "component function check" (with intelligent key) or dlk- 253, "component function check" (without intelligent key).
Is the inspection result normal? Yes >> go to 2.
No >> go to 3.
2.Check combination meter input signal
Select the METER/M&A Data Monitor and check the DOOR W/L monitor value while opening and closing doors.
Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-77, "Removal and Installation".
NO >> Replace BCM. Refer to BCS-73, "Removal and Installation" (with Intelligent Key) or BCS-126, "Removal and Installation" (without Intelligent Key).
3.Check door switch signal circuit
Check the door switch signal circuit. Refer to dlk-102, "diagnosis procedure" (with intelligent key) or dlk- 253, "diagnosis procedure" (without intelligent key).
Is the inspection result normal? Yes >> go to 4.
No >> repair or replace harness or connector.
4.Check door switch
Perform a unit check for the door switch. Refer to DLK-103, "Component Inspection" (with Intelligent Key) or DLK-255, "Component Inspection" (without Intelligent Key).
Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-77, "Removal and Installation".
NO >> Replace applicable door switch. Refer to DLK-194, "Removal and Installation" (with Intelligent Key) or DLK-341, "Removal and Installation" (without Intelligent Key).
Precaution for work
When removing or disassembling each component, be careful not to damage
or deform it. If a component
may be subject to interference, be sure to protect it with a shop cloth.
When removing (disengaging) components with a screwdriver or similar
tool, be sure to wrap the component
with a ...
C1716, C1717, C1718, C1719 Transmitter (pressure data)
DTC Logic
NOTE:
The Signal Tech II Tool (J-50190) can be used to perform the following
functions. Refer to the Signal Tech II
User Guide for additional information.
Activate and display TPMS transmitter IDs
Display tire pressure reported by the TPMS transmitter
Read TPMS DTCs
Register ...
ECU diagnosis information
Diagnosis sensor unit
DTC Index
DIAGNOSTIC CODE CHART
NOTE:
Follow the procedures in numerical order when repairing malfunctioning
parts. Confirm whether malfunction is
eliminated using air bag warning lamp or CONSULT each time repair is finished.
If malfunction is still
observed, proceed ...