Nissan Sentra manuals

Nissan Sentra Service Manual: System initialization

Description

If any of the following operations are performed, the initialization is necessary for normal operation of power window system.

CAUTION:

The following specified operations can not be performed under the non-initialized condition.

Work Procedure

1.STEP 1

  1. Turn ignition switch ON.
  2. Operate power window switch to fully open the window. (This operation is unnecessary if the window is already fully open)
  3. Operate the power window switch in the UP position (AUTO-UP operation). Even after glass stops at fully closed position, keep pulling the switch for 2 seconds or more.
  4. Release the switch and check that AUTO-UP function operates normally.

>> GO TO 2.

2.STEP 2

Check anti-pinch function. Refer to PWC-30, "Work Procedure".

>> END

Additional service when replacing power window main switch
Description When the power window main switch is replaced, the initialization is necessary for normal operation of power window system. CAUTION: The following specified operations can not be per ...

Anti-pinch inspection
Description If any of the following operations are performed, the initialization is necessary for normal operation of antipinch function. Disconnection and connection of battery cable from neg ...

Other materials:

Front manual seat adjustment
Forward and backward Pull the center of the bar up and hold it while you slide the seat forward or backward to the desired position. Release the bar to lock the seat in position. Reclining To recline the seatback, pull the lever up and lean back. To bring the seatback forward, pull the ...

Inspection and adjustment
Additional service when replacing control unit ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Description WARNING: Always perform zero point reset using CONSULT when removing and installing the front passenger seat or servicing the occupant classification system. If zero point reset is not ...

P0713 Transmission fluid temperature sensor A
DTC Logic DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition Possible causes P0713 FLUID TEMP SENSOR A (Transmission Fluid Temperature Sensor A Circuit High) The CVT fluid temperature identified by the TCM is ...

В© 2014-2024 Copyright www.nisentra.com