Nissan Sentra manuals

Nissan Sentra Service Manual: System description

Service Notice and Precautions for EPS System
Check the following item when performing the trouble diagnosis. Check any possible causes by interviewing the symptom and it′s condition from the customer if any malfunction, such ...

Component parts
Component Parts Location EPS control unit (view with steering column removed from vehicle) EPS motor (view with steering column removed from vehicle) Torque sensor (view with ...

Other materials:

Basic inspection
Diagnosis and repair work flow Work flow Detailed flow 1.Obtain information about symptom Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurs. >> GO TO 2. 2.Check symptom Check the symptom based ...

P050A, P050B, P050E Cold start control
Description ECM controls ignition timing and engine idle speed when engine is started with pre-warming up condition. This control promotes the activation of three way catalyst by heating the catalyst and reduces emissions. DTC Logic DTC DETECTION LOGIC NOTE: If DTC P050A, P050B or P050E ...

Diagnosis description : permanent diagnostic trouble code (permanent DTC)
Permanent DTC is defined in SAE J1979/ISO 15031-5 Service $0A. ECM stores a DTC issuing a command of turning on MIL as a permanent DTC and keeps storing the DTC as a permanent DTC until ECM judges that there is no presence of malfunction. Permanent DTCs cannot be erased by using the erase f ...

В© 2014-2025 Copyright www.nisentra.com