Nissan Sentra Service Manual: System description
Component parts
Component parts location
Instrument lower finisher
Eco mode switch
- The eco mode switch is installed to the instrument lower finisher.
- When the ECO mode indicator lamp on the combination meter is OFF and the ECO mode switch is pressed, the ECO mode is active and the ECO mode indicator lamp is ON.
- When the ECO mode indicator lamp on the combination meter is ON and the ECO mode switch is pressed, the ECO mode is cancelled and the ECO mode indicator lamp is OFF.
Eco mode indicator lamp
Design/purpose
The ECO mode indicator lamp inform the driver that the vehicle is in ECO mode.
Signal path
- Ecm receives eco mode switch signal (on/off) from combination meter via can communication
- ECM transmits ECO mode indicator signal to combination meter via CAN communication. Based on the signal, combination meter illuminates ECO mode indicator lamp.
Lighting condition
When all of the following conditions are satisfied.
- Ignition switch: ON
- The eco mode switch is pressed when the eco mode indicator lamp is off
Shutoff condition
When any of the condition listed below is satisfied.
- Ignition switch: Other than ON
- The ECO mode switch is pressed when the ECO mode indicator lamp is ON.
- The sport mode switch is pressed when the eco mode indicator lamp is on.
System
Eco mode control
Eco mode control : system description
System diagram
System description
- Ecm transmits eco mode indicator signal to combination meter via can communication. Combination meter illuminates eco mode indicator lamp according to the signal.
- For ecm control details, refer to ec-52, "eco mode control : system description".
Fail-safe
If ecm detects a malfunction during eco mode, the eco mode indicator lamp turns off and the control switches to the normal mode control.
Precautions
Precaution for supplemental restraint system (srs) "air bag" and "seat belt
pre-tensioner"
The supplemental restraint system such as “air bag” and “seat belt pre- ...
Ecu diagnosis information
Ecm
List of ecu reference
Reference list
...
Other materials:
Symptom diagnosis
Nissan vehicle immobilizer systemnats
symptoms
Symptom Table
Note:
Before performing the diagnosis in the following table, check
“SEC-171, "Work Flow"”.
Check that vehicle is under the condition shown in “Conditions of
vehicle” before starting diagnosis, ...
Dtc/circuit diagnosis
U1000 can comm circuit
Description
Refer to LAN-7, "CAN COMMUNICATION SYSTEM : System Description".
Dtc logic
Dtc detection logic
Consult display
Dtc detection condition
Possible cause
Can comm circuit
[u1000]
When ipdm e/r cannot communicate with can comm ...
NISSAN Voice Recognition System (if so
equipped)
The NISSAN Voice Recognition system allows
hands-free operation of the systems equipped on
this vehicle, such as the phone and navigation
systems.
To operate NISSAN Voice Recognition, press
the button located on the steering
wheel.
When prompted, speak the command for the
system you wi ...
