Precaution
Component partsEcm branch line circuit
Diagnosis Procedure
1.Check connector
Turn the ignition switch off.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the ECM for damage, bend and loose
connection (unit side and
connector side).
Is the inspection result normal?
YES > ...
DTC/circuit diagnosis
P1610 LOCK MODE
Description
ECM forcibly switches to the mode that inhibits engine start, when engine
start operation is performed 5 times
or more while communication between ECM and BCM is not normal.
DTC Logic
DTC DETECTION LOGIC
NOTE:
If DTC P1610 is displayed with other DTC (for BCM or ...
Driver side power window does not operate
Diagnosis Procedure
1.Check front power window motor (driver side)
Check front power window motor (driver side).
Refer to pwc-43, "driver side : diagnosis procedure".
Is the inspection result normal?
Yes >> go to 2.
No >> repair or replace the malfunctioning parts.
...