Nissan Sentra Service Manual: System
- Engine control system
- Multiport fuel injection system
- Electric ignition system
- Intake valve timing control
- Exhaust valve timing control
- Intake manifold runner control
- Intake manifold tuning system
- Engine protection control at low engine oil pressure
- Fuel filler cap warning system
- Air conditioning cut control
- Cooling fan control
- Starter motor drive control
- Evaporative emission system
- Automatic speed control device (ASCD)
- Can communication
- Eco mode control
- Sport mode control
Structure and operation
Positive Crankcase Ventilation
This system returns blow-by gas to the intake manifold.
The positive crankcase ventilation (PCV) valve is provided to conduct crankcase
blow-by gas to the inta ...
Engine control system
ENGINE CONTROL SYSTEM : System Description
SYSTEM DIAGRAM
NOTE:
Position switch and clutch pedal position switch are not used in
models with CVT.
ASCD steering switch and brake pedal po ...
Other materials:
Tires
Replace or rotate tires in accordance with maintenance schedules
and treadwear.
Checking tires
Check if the treadwear indicators are showing on the tires. Also check
the tires for uneven wear, such as excessive wear on one side of the
tread.
Check the spare tire condition and pressure if not ...
P0507 ISC System
Description
The ECM controls the engine idle speed to a specified level through the fine
adjustment of the air, which is let
into the intake manifold, by operating the electric throttle control actuator.
The operating of the throttle valve is
varied to allow for optimum control of the engine ...
Glass
Use glass cleaner to remove smoke and dust film
from the glass surfaces. It is normal for glass to
become coated with a film after the vehicle is
parked in the hot sun. Glass cleaner and a soft
cloth will easily remove this film.
CAUTION
When cleaning the inside of the windows,
do not use sha ...
