Nissan Sentra Service Manual: Symptom diagnosis

Nissan Sentra Service Manual / Cruise control & driver assistance / Drive mode system / Sport mode (cvt) / Symptom diagnosis

The sport mode indicator lamp does not turn on

Description

The sport mode indicator lamp does not turn on when the sport mode switch is operated.

Diagnosis procedure

1.Perform combination meter on board diagnosis

Perform combination meter on board diagnosis. Refer to mwi-16, "description".

Is the check result normal? Yes >> go to 2.

No >> replace combination meter. Refer to mwi-77, "removal and installation".

2.Check dtc (tcm)

With consult

Start the engine.
Check вЂњself diagnostic resultsвЂќ in вЂњtransmissionвЂќ.

Is any dtc detected? Yes >> check dtc detected item. Refer to tm-126, "dtc index".

No >> go to 3.

3.Check dtc (ecm)

Check вЂњself diagnostic resultsвЂќ in вЂњengineвЂќ. With consult

Check вЂњself diagnostic resultsвЂќ in вЂњengineвЂќ.

Is any dtc detected? Yes >> check dtc detected item. Refer to ec-94, "dtc index".

No >> go to 4.

4.Check dtc (combination meter)

Check вЂњself diagnostic resultsвЂќ in вЂњmeter/m&aвЂќ. With consult

Check вЂњself diagnostic resultsвЂќ in вЂњmeter/m&aвЂќ.

Is any dtc detected? Yes >> check dtc detected item. Refer to mwi-26, "dtc index".

No >> go to 5.

5.Check combination meter input/output signal

With consult

Select вЂњdata monitorвЂќ in вЂњmeter/m&aвЂќ.
Select вЂњsport mode indвЂќ.
Check that вЂњsport mode indвЂќ turns on/off when sport mode switch is operated. Refer to mwi-20, "reference value".

Is any dtc detected? Yes >> replace combination meter. Refer to mwi-77, "removal and installation".

No >> go to 6.

6.Check sport mode switch circuit

Check sport mode switch circuit. Refer to dms-34, "diagnosis procedure".

Is any dtc detected? Yes >> inspection end

NO >> Repair or replace malfunctioning parts

Dtc/circuit diagnosis

Sport mode switch Component function check 1. Check sport mode switch operation Turn ignition switch on. Check sport mode indicator lamp turns on/off on combination meter when turn sport m ...

Removal and installation

Sport mode switch Removal and installation Removal Remove instrument lower panel lh. Refer to ip-14, "exploded view". Remove SPORT mode switch. Installation Installation is in th ...

Other materials:

Headlamp (hi) circuit
Description The IPDM E/R (intelligent power distribution module engine room) controls the headlamp high relay based on inputs from the BCM over the CAN communication lines. When the headlamp high relay is energized, power flows through fuses 41 and 42, located in the IPDM E/R. Power then flo ...

Front suspension assembly
Inspection COMPONENT PART Check the mounting conditions (looseness, backlash) of each component. Verify the component conditions (wear, damage) are normal. Ball Joint Axial End Play Set the front wheels in a straight-ahead position. Hold the axle side of the transverse link, and check th ...

Periodic maintenance
REAR WHEEL HUB Inspection COMPONENT PART Check the mounting conditions (looseness, back lash) of each component and component conditions (wear, damage) are normal. WHEEL HUB ASSEMBLY (BEARING-INTEGRATED TYPE) Check the following items, and replace the part it necessary. Move wheel hub as ...