Nissan Sentra Owners Manual: Replacing
Replace the wiper blades if they are worn.
To replace the windshield wiper blades, follow the procedure below:
- When ignition switch is ON or within 60 seconds after placing the ignition switch from ON to OFF position.
- Quickly push the windshield wiper and washer lever to the mist position twice 2 within 0.5 seconds. This action will cause the wipers to take the service position automatically.
- Lift the wiper arm away from the windshield.
Type A
Type B
- Push the release tab 4 .
- Move the wiper blade down 5 and remove.
- Insert the new wiper blade onto the wiper arm until it clicks into place.
- Rotate the wiper blade so the dimple is in the groove.
- Finally, push the windshield wiper and washer lever to the mist position 8 . This action will cause the wipers to resume the set position.
CAUTION
- After wiper blade replacement, return the wiper arm to its original position; otherwise it may be damaged when the hood is opened.
- Make sure the wiper blades contact the glass; otherwise the arms may be damaged from wind pressure.
Cleaning
If your windshield is not clear after using the
windshield washer or if a wiper blade chatters
when running, wax or other material may be on
the blade or windshield.
Clean the outside of the win ...
Brakes
If the brakes do not operate properly, have the
brakes checked by a NISSAN dealer.
Self-adjusting brakes
Your vehicle is equipped with self-adjusting
brakes.
The front (and rear– if so equipp ...
Other materials:
Pictorial index
Instrument panel
Engine switch
Starting the engine/changing the positions or modes
Emergency stop of the engine
When the engine will not start
Shift lever
Changing the shift position
Precautions for towing
When the shift lever does not move
Meters
Reading the meters/adjustin ...
Basic inspection
Diagnosis and repair work flow
Work flow
OVERALL SEQUENCE
DETAILED FLOW
1.INTERVIEW FOR MALFUNCTION
Find out what the customer's concerns are.
>> GO TO 2
2.SYMPTOM CHECK
Verify the symptom from the customer's information.
>> GO TO 3
3.BASIC INSPECTION
Check the operation ...
Interior lights
The interior light can be turned ON regardless
of door position. The light will go off after
a period of time unless the ignition switch is
placed in the ON position when any door is
opened.
The interior lights can be set to operate
when the doors are opened. To turn off the
int ...
