Nissan Sentra Service Manual: Removal and installation

Clutch fluid

Inspection FLUID LEAKAGE Check clutch line for cracks, deterioration or other damage. Replace any damaged parts. Check for fluid leakage by fully depressing clutch pedal while engine is r ...

Clutch pedal

Exploded View Clutch pedal Stopper rubber Clip Clutch interlock switch (if equipped) Clutch pedal position switch (if equipped) Pedal pad Pedal stopper rubber Removal and Instal ...

Other materials:

Radio
With the ignition placed in the ACC or ON position, press the PWR (power)/VOL (volume) knob to turn the radio on. If you listen to the radio with the engine not running, the ignition should be placed in the ACC position. Radio reception is affected by station signal strength, distance from r ...

Battery current sensor
Exploded view Battery current sensor Current sensor harness connector Removal and installation Removal Loosen the battery terminal nut and disconnect battery negative terminal. Refer to PG-50, "Exploded View". Disconnect the harness connector from current sensor. ...

P1652 Starter motor system comm
Description ECM controls ON/OFF state of the starter relay, according to the engine and vehicle condition. ECM transmits a control signal to IPDM E/R via BCM by CAN communication. Under normal conditions, ECM controls and maintains the starter relay in OFF state during following condition: ...