Nissan Sentra Owners Manual: Receiving a call
When a call is placed to the connected phone, the display will change to phone mode.
To accept the incoming call, either:
- Press the
button on
the steering wheel, or - Touch the green phone icon on the screen.
To reject the incoming call, either:
- Press the
button on the
steering wheel, or - Touch the red phone icon on the screen.
Making a call
To make a call, follow the procedure below:
Press the button on the
control panel.
The “Phone” screen will appear on the display.
Select one of the following options to make a
call ...
During a call
While a call is active, the following options are
available on the screen:
“Handset”
Select this option to switch control of the
phone call over to the handset.
“Mute Mic.”
Select ...
Other materials:
C1113, C1145, C1146 Yaw rate/side/decel G Sensor
DTC Logic
DTC DETECTION LOGIC
DTC
Display Item
Malfunction detected condition
Possible causes
C1113
G SENSOR
When a malfunction is detected in longitunal G sensor
signal.
ABS actuator and electric unit (control unit)
C1145
YAW RATE ...
Ecm branch line circuit
Diagnosis procedure
1.Check connector
Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the ECM for damage, bend and loose
connection (unit side and
connector side).
Is the inspection result normal?
Yes > ...
Floor trim
Exploded View
Floor trim
Harness protector
Front floor spacer (RH)
Front floor spacer (LH)
Rear floor spacer (LH)
Rear floor spacer (RH)
Column hole cover
Pawl
Front
Removal and Installation
REMOVAL
Remove front seat assemblies. Refer to the following.
Refer to S ...
