Nissan Sentra manuals

Nissan Sentra Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Commercial Service Tool


Commercial Service Tool

System description


Precaution for Liquid Gasket
Removal of liquid gasket After removing the bolts and nuts, separate the mating surface and remove the old liquid gasket using tool. Tool number : kv10111100 (j-37228) Caution: Do not damag ...

System description
DESCRIPTION Engine Cooling System Schematic CVT Models Radiator Water inlet Reservoir tank Thermostat Engine oil cooler Thermostat housing Water pump Cylinder head Cylinder b ...

Other materials:

Diagnosis system (bcm) (with intelligent key system)
Common item Common item : consult function (bcm - common item) APPLICATION ITEM CONSULT performs the following functions via CAN communication with BCM. Direct Diagnostic Mode Description ECU identification The BCM part number is displayed. Self Diagnostic Result ...

Front wheel hub
Exploded View Steering knuckle Splash guard Wheel stud Wheel hub and bearing Disc brake rotor Wheel hub lock nut Nut retainer Cotter pin Removal and Installation Remove the wheel and tire using power tool. Refer to WT-47, "Exploded View". Remove the brake ...

Engine oil
Inspection Engine oil level Note: Before starting engine, put vehicle horizontally and check the engine oil level. If engine is already started, stop it and allow 10 minutes before checking. Pull out oil level gauge and wipe it clean. Insert oil level gauge and check that the engine oil ...

В© 2014-2024 Copyright www.nisentra.com