Nissan Sentra manuals

Nissan Sentra Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Commercial Service Tools


Commercial Service Tools

Clip list


Clip list

Descriptions for Clips

Replace any clips which are damaged during removal or installation.




Wiring diagram


Precaution for Work
When removing or disassembling each component, be careful not to damage or deform it. If a component may be subject to interference, be sure to protect it with a shop cloth. When removing (d ...

Wiring diagram
Heated seat Wiring Diagram ...

Other materials:

Sensor power supply 2 circuit
Description ECM supplies a voltage of 5.0 V to some of the sensors systematically divided into 2 groups, respectively. Accordingly, when a short circuit develops in a sensor power source, a malfunction may occur simultaneously in the sensors belonging to the same group as the shorted-circui ...

The oil pressure warning lamp does not turn off
Description The oil pressure warning lamp remains illuminated while the engine is running (normal oil pressure). Diagnosis procedure 1.Check combination meter input signal Start the engine and select METER/M&A on CONSULT. Observe oil w/l data monitor and the operation of the oil pres ...

Diagnosis system (AIR BAG)
Description CAUTION: Never use electrical test equipment on any circuit related to the SRS unless instructed in this Service Manual. SRS wiring harnesses can be identified by yellow and/or orange harnesses or harness connectors. Never repair, splice or modify the SRS wiring harness. ...

В© 2014-2026 Copyright www.nisentra.com