Nissan Sentra manuals

Nissan Sentra Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Commercial Service Tool


Commercial Service Tool

System description


Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-T ...

System description
COMPONENT PARTS Component Part Location ECM IPDM E/R BCM (view with combination meter removed) A/C auto amp. (view with A/C switch assembly removed) A/C switch assembly A/C ...

Other materials:

Oil seal
Valve oil seal : Removal and Installation REMOVAL Rotate crankshaft, and set piston whose valve oil seal is to be removed to TDC. This will prevent valve from dropping into cylinder. CAUTION: When rotating crankshaft, be careful to avoid scarring front cover with timing chain. Re ...

U1000 CAN Comm circuit
Description CAN (Controller Area Network) is a serial communication system for real time application. It is an on-vehicle multiplex communication system with high data communication speed and excellent error detection ability. Many electronic control units are equipped into vehicles, and e ...

P1715 Input speed sensor
Description ECM receives input speed sensor signal from TCM through CAN communication line. ECM uses this signal for engine control. DTC Logic DTC DETECTION LOGIC NOTE: If DTC P1715 is displayed with DTC UXXXX, first perform the trouble diagnosis for DTC UXXXX. If DTC P1715 is displa ...

© 2014-2026 Copyright www.nisentra.com