Nissan Sentra Service Manual: Preparation
Special service tool
The actual shape of the tools may differ from those illustrated here.
Commercial service tool
Precaution
Precaution for supplemental restraint system (SRS) "air bag" and "seat
belt pre-tensioner"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE- ...
System description
Component parts
Component part location
ECM
IPDM E/R
BCM (view with instrument panel removed)
A/C auto amp. (view with A/C switch
assembly removed)
A/C switch assembly
A/C Com ...
Other materials:
Low tire pressure warning lamp does not turn oFF
Low Tire Pressure Warning Lamp Stays On When Ignition Switch Is Turned On
DIAGNOSTIC PROCEDURE
1.INSPECT BCM CONNECTOR
Turn ignition switch OFF.
Disconnect BCM connectors.
Check terminals for damage or loose connections.
Is the inspection result normal?
YES >> GO TO 2.
NO > ...
Front door glass
Removal and Installation
REMOVAL
WARNING:
Before servicing, turn ignition switch OFF, disconnect both
battery terminals and wait at least three
minutes.
Do not use air tools or electric tools for servicing.
NOTE:
LH front door panel shown; RH side similar
Disconnect the battery ...
Cleaning interior
This vehicle has new and unique surfaces on the
center console and door pull finishers. If cleaning
is required use mild soap and water. However if
mild soap and water won’t clean the center console
and door pull finishers, use NISSAN Vinyl
and Leather Cleaner (or equivalent).
Occasionally ...
