Nissan Sentra manuals

Nissan Sentra Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those of illustrated here.

Basic inspection


Precaution for Work
When removing or disassembling each component, be careful not to damage or deform it. If a component may be subject to interference, be sure to protect it with a shop cloth. When removing (d ...

Basic inspection
Component inspection Inspection AFTER A COLLISION WARNING: Inspect all seat belt assemblies including retractors and attaching hardware after any collision. NISSAN/INFINITI recommends that al ...

Other materials:

Doors
When the doors are locked using one of the following methods, the doors cannot be opened using the inside or outside door handles. The doors must be unlocked to open the doors. WARNING Always have the doors locked while driving. Along with the use of seat belts, this provides ...

2135 TP Sensor
DTC Logic DTC DETECTION LOGIC NOTE: If DTC P2135 is displayed with DTC P0643, first perform the trouble diagnosis for DTC P0643. Refer to EC-353, "DTC Logic". DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible cause ...

Adjusting the set speed - Dynamic radar cruise control
Adjusting the set speed by the switch To change the set speed, press the "+ RES" or "- SET" switch until the desired set speed is displayed. Increases the speed Decreases the speed Fine adjustment: Press the switch. Large adjustment: Press and hold the switch to change the speed, ...

В© 2014-2024 Copyright www.nisentra.com