Toyota Camry (XV70): PKSB (Parking Support Brake)
The Parking Support Brake system consists of the following functions that operate when driving at a low speed or backing up, such as when parking. When the system determines that the possibility of a collision with a detected object is high, a warning operates to urge the driver to take evasive action. If the system determines that the possibility of a collision with a detected object is extremely high, the brakes are automatically applied to help avoid the collision or help reduce the impact of the collision.
PKSB (Parking Support Brake) system
■ Parking Support Brake function (static objects)
Ultrasonic sensors are used to detect static objects, such as a wall, in the detection area when driving at a low speed or backing up.
■ Parking Support Brake function (rear-crossing vehicles)
Rear radar sensors are used to detect approaching vehicles in the detection area behind the vehicle when backing up.
Types of sensors
- Front corner sensors
- Front center sensors
- Rear corner sensors
- Rear center sensors
Turning the Parking Support Brake on/off
The Parking Support Brake can be enabled/disabled on the multiinformation display. All of the Parking Support Brake functions (static objects and rear-crossing vehicles) are enabled/disabled simultaneously.
Use the meter control switches to enable/disable the parking support brake.
1. Press 
of the meter control
switches, select 
.
2. Press 
of the meter control
switches, select 
.
3. Press 
of the meter control
switch.
4. Select the "Yes" and push 
.
When the Parking Support Brake is disabled, the PKSB OFF indicator illuminates.
To re-enable the system when it was disabled, select
on the multi-information
display, select 
and then "On". If
disabled using this method, the
system will not be re-enabled by turning the engine switch off and then to
IGNITION ON mode.
Displays and buzzers for engine output restriction control and brake control
If the engine output restriction control or brake control operates, a buzzer will sound and a message will be displayed on the multi-information display to alert the driver.
Depending on the situation, engine output restriction control will operate to either limit acceleration or restrict output as much as possible.
READ NEXT:
Parking Support Brake function - PKSB (Parking Support
Brake)
If the Parking Support Brake detects that a collision with an object is
possible, the engine output will be restricted to restrain any increase
in the vehicle speed. (Engine output restriction contr
Parking Support Brake
function (static
objects)
If a collision with an object may occur due to the vehicle suddenly
moving forward due to an accidental accelerator pedal
operation, the vehicle moving the unintended direction due to
the wrong shi
Parking Support Brake
function (rear-crossing
vehicles)
If a radar sensor detects a vehicle approaching from the right or
left at the rear of the vehicle and the system determines that the
possibility of a collision is high, this function will perform br
SEE MORE:
Engine oil
With the engine at operating temperature and turned off, check the oil
level on the dipstick.
■ Checking the engine oil
1. Park the vehicle on level ground. After warming up the engine
and turning it off, wait more than 5 minutes for the oil to drain
back into the bottom of the engine.
2. Ho
Removal
REMOVAL CAUTION / NOTICE / HINT
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the battery removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Repl
