Nissan Sentra Service Manual: Periodic maintenance

Both side front fog lamps are not turned on

Description The front fog lamps do not turn on in any setting. Diagnosis procedure 1.Combination switch (lighting and turn signal switch) inspection Check the combination switch (lighting and turn ...

Headlamp

Aiming adjustment Preparation before adjusting Before performing aiming adjustment, check the following: Ensure all tires are inflated to correct pressure. Place vehicle and screen on level su ...

Other materials:

Vehicle identification number (VIN) plate
The vehicle identification number (VIN) plate is attached as shown. This number is the identification for your vehicle and is used in the vehicle registration. Vehicle identification number (chassis number) The vehicle identification number is located as shown. Engine serial number ...

Vehicle Dynamic Control (VDC) system
The Vehicle Dynamic Control (VDC) system uses various sensors to monitor driver inputs and vehicle motion. Under certain driving conditions, the VDC System helps to perform the following functions: Controls brake pressure to reduce wheel slip on one slipping drive wheel so power is trans ...

Additional service when replacing ecm
Description When replacing ECM, the following procedure must be performed. (For details, refer to EC-135, "Work Procedure".) PROGRAMMING OPERATION NOTE: After replacing with a blank ECM, programming is required to write ECM information. Be sure to follow the procedure to perform t ...