Nissan Sentra manuals

Nissan Sentra Owners Manual: NISSAN Voice Recognition System (if so equipped)

The NISSAN Voice Recognition system allows hands-free operation of the systems equipped on this vehicle, such as the phone and navigation systems.

To operate NISSAN Voice Recognition, press the wheel. button located on the steering
wheel.

When prompted, speak the command for the system you wish to activate. The command given is picked up by the microphone and performed when it is properly recognized. NISSAN Voice Recognition will provide a voice response as well as a message in the center display to inform you of the command results.

Phone settings
To access the phone settings: Press the [ ] button. Touch the “Settings” key. Touch the “Phone & Bluetooth” key. Touch the “Phone Settings” key and adjust the following se ...

Using the system
Initialization When the ignition switch is in the ON position, NISSAN Voice Recognition is initialized, which takes a few seconds. When completed, the system is ready to accept voice commands. If ...

Other materials:

Ecu diagnosis information
Bcm (body control module) List of ecu reference Moonroof motor assembly Reference value Terminal layout Physical values ...

Seat belt instructions for Canadian owners (in French)
The following is a French explanation of seat belt instructions extracted from the seat belt section in this manual. See the seat belt section for more detailed seat belt instructions in English. Utilisation correcte des ceintures de sécurité Déroulez la sangle diagonale de telle sorte ...

Power window and door lock/unlock switch RH
Removal and Installation REMOVAL Release the pawls using a suitable tool and lift the power window and door lock/unlock switch RH and finisher as an assembly and remove. Disconnect the harness connector from the power window and door lock/unlock switch RH. Release the four pawls (tw ...

© 2014-2024 Copyright www.nisentra.com