Nissan Sentra manuals

Nissan Sentra Owners Manual: NISSAN Intelligent Key® Operation

You can lock or unlock the doors without taking


You can lock or unlock the doors without taking the Intelligent Key out of your pocket or bag.

When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch within the range of operation.

Locking doors


  1. Move the shift lever to the P (Park) position, place the ignition switch in the LOCK position and make sure you carry the Intelligent Key with you.
  2. Close all doors.
  3. Push any door handle request switch 1 while carrying the Intelligent Key with you.
  4. All doors and the trunk will lock.
  5. The hazard warning lights flash twice and the outside buzzer sounds twice.

NOTE:


NOTE:

CAUTION

Lockout protection

To prevent the Intelligent Key from being accidentally locked in the vehicle, lockout protection is equipped with the Intelligent Key.

When the driver’s side door is open, the doors are locked, and then the Intelligent Key is put inside the vehicle and all the doors are closed; the lock will automatically unlock and the door buzzer sounds.

NOTE:

The doors may not lock when the Intelligent Key is in the same hand that is operating the request switch to lock the door.

Put the Intelligent Key in a purse, pocket or your other hand.

CAUTION

The lockout protection may not function under the following conditions:

Unlocking doors


  1. Carry the Intelligent Key.
  2. Push the door handle request switch 1 .
  3. The hazard warning lights flash once and the outside buzzer sounds once.
  4. Push the door handle request switch 1 again within 60 seconds to unlock all doors.

If a door handle is pulled while unlocking the doors, that door may not be unlocked. Returning the door handle to its original position will unlock the door. If the door does not unlock after returning the door handle, push the door handle request switch to unlock the door.

All doors will be locked automatically unless one


All doors will be locked automatically unless one of the following operations is performed within 1 minute after pushing the request switch.

The interior light timer illuminates for a period of time when a door is unlocked and the room light switch is in the DOOR position.

The interior light can be turned off without waiting by performing one of the following operations.

Opening the trunk lid


  1. Push the trunk opener request switch A for more than 1 second while carrying the Intelligent Key with you.
  2. The trunk will unlatch. A chime will sound 4 times.
  3. Raise the trunk lid to open the trunk.

Lockout protection

To prevent the Intelligent Key from being accidentally locked in the trunk, lockout protection is equipped with the Intelligent Key.

When all doors are locked and the trunk lid is closed with the Intelligent Key inside the trunk, the outside buzzer will sound and the trunk will open.

Door locks/unlocks precaution
Do not push the door handle request switch with the Intelligent Key held in your hand as illustrated. The close distance to the door handle will cause the Intelligent Key system to have ...

How to use the remote keyless entry function
The remote keyless entry function can operate all door locks using the remote keyless function of the Intelligent Key. The remote keyless function can operate at a distance of 33 ft (10 m) away fr ...

Other materials:

C1115 ABS Sensor [abnormal signal]
DTC Logic DTC DETECTION LOGIC DTC Display Item Malfunction detected condition Possible causes C1115 ABS SENSOR [ABNORMAL SIGNAL] When difference in wheel speed between any wheel and others is detected while the vehicle is driven, because of installation of t ...

Diagnosis system (BCM) (without intelligent key system)
Common item Common item : consult function (bcm - common item) APPLICATION ITEM CONSULT performs the following functions via CAN communication with BCM. Direct Diagnostic Mode Description ECU identification The BCM part number is displayed. Self Diagnostic Result ...

Removal and installation
Combination meter Exploded view Combination meter Front cover Removal and installation Removal Remove cluster lid a. Refer to ip-19, "removal and installation". Remove the screws from the combination meter. Remove the combination meter. Disconnect the comb ...

© 2014-2024 Copyright www.nisentra.com