Nissan Sentra manuals

Nissan Sentra Service Manual: Key to Symbols Signifying Measurements or Procedures




How to read wiring diagrams


How to Follow Test Groups in Trouble Diagnosis
Test group number and test group title Test group number and test group title are shown in the upper portion of each test group. Work and diagnosis procedure Start to diagn ...

How to read wiring diagrams
...

Other materials:

Engine oil and oil filter recommendations
Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See “Recommended fluids/lubricants and capacities” in this section. NISSAN recommends the use of an energy conserving oil in order ...

Both side headlamps (lo) are not turned on
Description The headlamps (both sides) do not turn on in any lighting switch setting. Diagnosis Procedure 1.Check combination switch (lighting and turn signal switch) Check the combination switch (lighting and turn signal switch). Refer to BCS-72, "Symptom Table" (with Intelligent ...

P1650 Starter motor relay 2
Description ECM controls ON/OFF state of the starter relay, according to the engine and vehicle condition. ECM transmits a control signal to IPDM E/R via BCM by CAN communication. Under normal conditions, ECM controls and maintains the starter relay in OFF state during following condition: ...

© 2014-2026 Copyright www.nisentra.com