Nissan Sentra manuals

Nissan Sentra Owners Manual: If your vehicle overheats

Nissan Sentra Owners Manual / In case of emergency / If your vehicle overheats

If your vehicle is overheating (indicated by an extremely high temperature gauge reading), or if you feel a lack of engine power, detect abnormal noise, etc., take the following steps.

WARNING

  • Do not continue to drive if your vehicle overheats. Doing so could cause engine damage or a vehicle fire.

  • To avoid the danger of being scalded, never remove the radiator cap while the engine is still hot. When the radiator cap is removed, pressurized hot water will spurt out, possibly causing serious injury.

  • Do not open the hood if steam is coming out.

  1. Move the vehicle safely off the road, apply the parking brake and move the shift lever to N (Neutral) (manual transmission) or to P (Park) (CVT).

Do not stop the engine.

  1. Turn off the air conditioner (if so equipped).

    Open all the windows, move the heater or air conditioner temperature control to maximum hot and fan control to high speed.

  2. Get out of the vehicle. Look and listen for steam or coolant escaping from the radiator before opening the hood. (If steam or coolant is escaping, turn off the engine.) Do not open the hood further until no steam or coolant can be seen.
  3. Open the engine hood.
WARNING

If steam or water is coming from the engine, stand clear to prevent getting burned.

  1. Visually check drive belts for damage or looseness. Also check if the cooling fan is running. The radiator hoses and radiator should not leak water. If coolant is leaking, the water pump belt is missing or loose, or the cooling fan does not run, stop the engine.
WARNING

Be careful not to allow your hands, hair, jewelry or clothing to come into contact with, or get caught in, engine belts or the engine cooling fan. The engine cooling fan can start at any time.

  1. After the engine cools down, check the coolant level in the engine coolant reservoir with the engine running. Add coolant to the engine coolant reservoir if necessary. Have your vehicle repaired at a NISSAN dealer.
Push starting
CAUTION Do not push start this vehicle. The three-way catalyst may be damaged. Continuously Variable Transmission (CVT) models and Manual Transmission (MT) cannot be push-started or towsta ...

Towing your vehicle
When towing your vehicle, all State (Provincial in Canada) and local regulations for towing must be followed. Incorrect towing equipment could damage your vehicle. Towing instructions are available ...

Other materials:

Front wheel hub and knuckle
Inspection COMPONENT PART Check that the mounting conditions (looseness, backlash) of each component and component conditions (wear, damage) are normal. WHEEL HUB ASSEMBLY (BEARING-INTEGRATED TYPE) Check the following items, and replace the part if necessary. Move the wheel hub and bearin ...

Diagnosis system (BCM) (with intelligent key system)
Common item COMMON ITEM : CONSULT Function (BCM - COMMON ITEM) APPLICATION ITEM CONSULT performs the following functions via CAN communication with BCM. Direct Diagnostic Mode Description ECU identification The BCM part number is displayed. Self Diagnostic Result ...

BCM branch line circuit
Diagnosis procedure 1.Check connector Turn the ignition switch off. Disconnect the battery cable from the negative terminal. Check the terminals and connectors of the bcm for damage, bend and loose connection (unit side and connector side). Is the inspection result normal? YES > ...

В© 2014-2022 Copyright www.nisentra.com