Nissan Sentra manuals

Nissan Sentra Service Manual: How to read wiring diagrams

Key to Symbols Signifying Measurements or Procedures
...

Connector symbols
Most of connector symbols in wiring diagrams are shown from the terminal side. Connector symbols shown from the terminal side are enclosed by a single line and followed by the direction mark. ...

Other materials:

How to erase permanent  DTC
Description OUTLINE When a DTC is stored in ECM When a DTC is stored in ECM and MIL is ON, a permanent DTC is erased with MIL shutoff if the same malfunction is not detected after performing the driving pattern for MIL shutoff three times in a raw. *1: When the same malfunction is detec ...

P0850 PNP Switch
Description For CVT models, transmission range switch is turn ON when the selector lever is P or N. For M/T models, park/neutral position (PNP) range switch is ON when the selector lever is Neutral position. ECM detects the position because the continuity of the line (the ON) exists. DTC ...

Engine oil
Inspection Engine oil level Note: Before starting engine, put vehicle horizontally and check the engine oil level. If engine is already started, stop it and allow 10 minutes before checking. Pull out oil level gauge and wipe it clean. Insert oil level gauge and check that the engine oil ...

В© 2014-2025 Copyright www.nisentra.com