Nissan Sentra Service Manual: High-mounted stop lamp
Removal and Installation
HIGH-MOUNTED STOP LAMP - WITH REAR SPOILER
Removal
- Remove the rear air spoiler. Refer to EXT-46, "Removal and Installation".
- Remove the screws and the high-mount stop lamp from the rear air spoiler.
Installation
Installation is in the reverse order of removal.
HIGH-MOUNTED STOP LAMP - WITHOUT REAR SPOILER
Removal
- Slide high-mounted stop lamp (1) rearward on parcel shelf to provide clearance for front tabs (A).
- Lift front of lamp assembly up and pull forward to provide clearance for rear tabs (B).
- Disconnect the harness connector from the high-mounted stop lamp and remove.
Installation
Installation is in the reverse order of removal.
Bulb Replacement
HIGH-MOUNTED STOP LAMP - WITH REAR SPOILER
The high-mounted stop lamp LED bulb is integrated into the high-mounted stop lamp and is serviced as an assembly. Refer to EXL-124, "Removal and Installation".
HIGH-MOUNTED STOP LAMP - WITHOUT REAR SPOILER
The high-mounted stop lamp LED bulb is integrated into the high-mounted stop lamp and is serviced as an assembly. Refer to EXL-124, "Removal and Installation".
Door mirror turn signal lamp
Removal and installation
The door mirror side turn signal lamp is integrated into the door mirror
assembly and is serviced as an assembly.
Refer to MIR-18, "Exploded View". ...
License plate lamp
Removal and Installation
REMOVAL
Remove the license lamp finisher. Refer to EXT-44, "Removal and
Installation".
Disconnect the harness connector (A) from the license plate
lamp ( ...
Other materials:
Normal operating condition
Compass
Compass : description
Compass
The electronic compass is highly protected from changes in most magnetic
fields. However, some large
changes in magnetic fields can affect it. Some examples are (but not limited
to): high tension power lines,
large steel buildings, subways, steel ...
Supplemental air bag warning light
The supplemental air bag warning light,
displaying in the instrument panel,
monitors
the circuits for the air bag systems, pretensioners
and all related wiring.
When the ignition switch is placed in the ON or
START position, the supplemental air bag warning
light illuminates for about ...
System description
Component parts
Component part location
ECM
IPDM E/R
BCM (view with instrument panel removed)
A/C auto amp. (view with A/C switch
assembly removed)
A/C switch assembly
A/C Compressor
Refrigerant pressure sensor (view
with front bumper fascia removed)
Ambient sensor
S ...
