Nissan Sentra manuals

Nissan Sentra Service Manual: Hazard switch

Nissan Sentra Service Manual / Driver controls / Exterior lighting system / Dtc/circuit diagnosis / Hazard switch

Component function check

1.Check hazard switch signal by consult

Consult data monitor


  1. Turn ignition switch ON.
  2. Select hazard sw of bcm (flasher) data monitor item.
  3. While operating the hazard switch, check the monitor status.

Is the inspection result normal?


Is the inspection result normal? Yes >> hazard switch circuit is normal.

No >> refer to exl-105, "diagnosis procedure".

Diagnosis procedure

Regarding wiring diagram information, refer to exl-58, "wiring diagram".

1.Check hazard switch signal input

  1. Turn ignition switch off.
  2. Disconnect hazard switch connector.
  3. Turn ignition switch on
  4. Check voltage between hazard switch harness connector and ground.

Is the inspection result normal?


Is the inspection result normal? YES >> GO TO 4.

NO >> GO TO 2.

2.Check hazard switch signal open circuit

  1. Turn ignition switch off.
  2. Disconnect BCM connector.
  3. Check continuity between hazard harness connector and bcm harness connector.

Is the inspection result normal?


Is the inspection result normal? Yes >> go to 3.

No >> repair or replace harness or connector.

3.Check hazard switch signal short circuit

Check continuity between hazard switch harness connector and ground.

Is the inspection result normal?


Is the inspection result normal? YES >> Replace BCM. Refer to BCS-73, "Removal and Installation" (with Intelligent Key system) or BCS- 126, "Removal and Installation" (without Intelligent Key system).

NO >> Repair or replace harness or connector.

4.Check hazard switch ground open circuit

Check continuity between hazard switch harness connector and ground.

Is the inspection result normal?


Is the inspection result normal? Yes >> replace hazard switch. Refer to exl-129, "removal and installation".

No >> repair or replace harness or connector.

Optical sensor
Description The optical sensor measures ambient light and transmits the optical sensor signal to the bcm. Component function check 1.Check optical sensor signal by consult Consult Turn the ...

Symptom diagnosis
...

Other materials:

The braking distance is long
Diagnosis Procedure CAUTION: The stopping distance on slippery road surfaces might be longer with the ABS operating than when the ABS is not operating. 1.CHECK ABS FUNCTION Turn ignition switch OFF. Disconnect ABS actuator and electric unit (control unit) connector to deactivate ...

Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injur ...

Using an anchor bracket (for top tether strap)
â–  Anchor brackets (for top tether strap) Anchor brackets are provided for each rear seat. Use anchor brackets when fixing the top tether strap. Seats with an adjustable type head restraint Seats with an integrated type head restraint â–  Fixing the top tether strap to the anchor bracke ...

© 2014-2024 Copyright www.nisentra.com