Exploded View
Apply brake fluid
Apply rubber grease
Disassembly and Assembly
DISASSEMBLY
WARNING:
Do not get fingers caught between piston and cylinder body.
CAUTION:
Do not damage cylinder inner wall.
ASSEMBLY
CAUTION:
Do not reuse piston seal.
CAUTION:
Do not reuse piston boot.
CAUTION:
Press the piston evenly and vary the pressing point to prevent cylinder inner wall from being rubbed.
Readiness for inspection/maintenance (I/M) test
Due to legal requirements in some states and
Canadian Provinces, your vehicle may be required
to be in what is called the “ready condition”
for an Inspection/Maintenance (I/M) test of
the emission control system.
The vehicle is set to the “ready condition” when it
is driven through c ...
Folding rear seat
Pull the knob A to fold each seatback down.
WARNING
Never allow anyone to ride in the cargo
area or on the rear seat when it is in the
fold-down position. Use of these areas
by passengers without proper restraints
could result in serious injury in an accident
or s ...
P099B Shift solenoid G
DTC Logic
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis content)
DTC detection condition
Possible causes
P099B
SHIFT SOLENOID G
(Shift Solenoid G Control Circuit
Low)
The TCM high clutch & reverse brake solenoid
valve current monitor ...