Nissan Sentra manuals

Nissan Sentra Service Manual: Front disc brake

Brake Burnishing

CAUTION:

  1. Drive the vehicle on straight, flat road.
  2. Depress the brake pedal until the vehicle stops.
  3. Release the brake pedal for a few minutes to allow the brake components to cool.
  4. Repeat steps 1 to 3 until pad and disc rotor are securely seated.
Brake fluid
Drain and Refill CAUTION: Do not spill or splash brake fluid on painted surfaces. Brake fluid may damage paint. If brake fluid is splashed on painted areas, wash it away with water immediate ...

Rear drum brake
Brake Burnishing CAUTION: Burnish contact surfaces between brake drum and brake lining according to the following procedure after refinishing or replacing brake drum, or if a soft pedal occu ...

Other materials:

P0447 EVAP Canister vent control valve
DTC Logic DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible cause P0447 VENT CONTROL VALVE (Evaporative emission system vent control circuit open) An improper voltage signal is sent to ECM throug ...

Recommended fluids and lubricants
Fluids and lubricants *1: For additional information, see “engine oil recommendation”. *2: As an alternative to this recommended oil, sae 5w-30 conventional petroleum based oil may be used and meet all specifications and requirements necessary to maintain the new vehicle limited ...

NISSAN Intelligent Key® (if so equipped)
Your vehicle can only be driven with the Intelligent Keys which are registered to your vehicle’s Intelligent Key components and NISSAN Vehicle Immobilizer System components. Never leave these keys in the vehicle. As many as 4 Intelligent Keys can be registered and used with one vehicle. The ...

© 2014-2024 Copyright www.nisentra.com